產品搜索

                  首頁 > 產品中心 > 拋丸機系列拋丸機系列

                  H型鋼/型材拋丸除銹機

                  H型鋼/鋼板拋丸清理機

                  產品結構 Product structure

                  本機主要是由清理室、室內輸送輥道與進出輸送輥道、拋丸器、彈丸循環系統 ( 含提升機、分離器、縱橫螺旋輸送器和供丸管道 ) 、吹掃機構、除塵、電氣控制等功能部件組成。

                  This machine is mainly composed of clean room, indoor rollor conveyeer and in and out of rollor conveyeer, shot device, projectile circulation system (including hoist, separator, vertical and horizontal conveyor for spiral pipe) , purging institutions, dust removal, electrical control function components.

                   

                  產品原理 Product principle

                  為連續送料的高功能連續作業清理機,在清理過程中由電氣控制的可變頻調速的輸送輥道將鋼結構件或鋼材、鋼板送進清理機室體內拋射區時,其周身各面受到來自八臺不同坐標方位的拋丸器的強力密集彈丸的打擊與磨擦,使其上的氧化銹層及污物迅速脫落,鋼材表面就獲得具有一定粗糙度的光潔表面。落入鋼材上面的彈丸與銹塵經回收螺旋輸送到彈丸循環系統,在清理室外兩邊輥道裝卸工件。清理過程中,撒落下來的丸塵混合物經室體漏斗、縱橫向螺旋輸送機匯集于提升機下部,再提升到機器上部的分離器里,分離后的純凈彈丸落入分離器料斗中,供拋丸循環使用。拋丸清理中產生塵埃,由抽風管送向除塵系統,凈化處理后的凈氣排放到大氣中;顆粒狀塵埃,由抽風管送向除塵系統,凈化處理后的凈氣排放到大氣中,顆粒狀塵埃被捕捉收集。

                   

                  Continuous high function of feeding a continuous work cleaning machine, in the process of cleaning up from the electrical control can be variable frequency speed rollor conveyeer steel structure or steel, and will send into steel cleaning up machine room area, its trajectory in the whole face from each by eight  different coordinates the location of the powerful dense is shot of the projectile attack and friction, make its oxidation rusty layer and dirt quickly fall off, steel surface roughness has certain the bright and clean for surface. Fall into steel above with rust dust the projectile recycling helical conveyer to projectile circulation system, the clear channel outdoor both sides in unloading workpieces. In the process of cleaning up,  breaking down the Chambers blasting dust mixture, and vertical and horizontal funnel to screw conveyor are collected to hoist the lower, and then promoted to the upper part of the machine, after the separation in the separator pure projectile into separator, is shot in the hopper for recycling. Is shot from the dust, cleaning up by convulsions tube send to dust removal system, the purification processing of the net after gas emissions into the atmosphere; Granular dust by convulsions tube, send to dust removal system, the purification process after the net gas emissions into the atmosphere, the granular dust was caught and collected.

                  H型鋼/鋼板拋丸清理機

                  產品特點 Product features

                  鋼板拋丸機是一種清理 H 鋼、型鋼、網架、鋼板的多功能鋼材拋丸預處理設備。拋丸器布置形式為多角度,選用了先進的高效拋丸器,拋射出高速密集的彈丸束,打擊在原始狀態工件的各個部位進行立體的、全方位的清理,使工件各表面上的銹蝕層、焊渣、氧化皮及其它污物迅速脫落,獲得具有一定粗糙度的光潔表面,提高了漆膜與鋼材表面的附著力,并提高工件的抗疲勞和抗腐蝕能力,改善了工件內在質量,延長其使用壽命。

                  Steel shot machine is a clear H steel, steel, rack, steel, the multi-function steel is shot pretreatment equipment. Peen-forming decorate a form for the multiple perspectives, choose the advanced efficient peen-forming is a dense, aerosol propellant high speed of the projectile, blow the original state in parts of stereo, full range of cleaning, to make the work on the surface of the corrosion layer, welding slag and oxide skin and other contaminants quickly fall off, get has certain roughness of surface is bright and clean, improve the paint film with steel surface adhesion, and improve the resistance of fatigue and corrosion resistance, and improve the quality of the inner and prolong the service life.

                   

                  主要技術參數 Main technical parameters

                   

                  機器型號 Model

                  單位 Unit

                  Q698

                  Q6915

                  Q6920

                  有效清理寬度 Width

                  mm

                  1200

                  1500

                  2000

                  室體進料口尺寸 Dimension

                  mm

                  1200×400

                  1200×400

                  2000×400

                  清理工件長度 Length

                  mm

                  12006000

                  120012000

                  120012000

                  輥道輸送速度 Speed(無極調速)

                  m/min

                  0.54

                  0.55

                  0.54

                  清理鋼板厚度 Thickness

                  mm

                  360

                  1.560

                  360

                  處理型材規格 Specifications

                   

                  20#<≤16#

                  20#<≤16#

                  20#<≤16#

                  拋丸量 Shot peening quantity

                  kg/min

                  4×250

                  4×250

                  6×250

                  首次裝入量 First input volume

                  kg

                  3000

                  4000

                  4500

                  滾刷(刮板)調整寬度 Width

                  mm

                  200

                  350

                  450

                  通風量 Air volume

                  m3/h

                  17560

                  19000

                  19550

                  外形尺寸 Shape dimension

                  mm

                  12180×4250×7095

                  15200×5370×6797

                  30650×6850×7500

                  地面以下深度 Depth under the ground

                  mm

                  1616

                  2257

                  2800

                  總功率(不含除塵)Total power

                  kw

                  78.3

                  113.5

                  156.6

                  機器總重 Total weight

                  t

                  20.4

                  33

                  41

                   

                  機器型號 Model

                  單位 Unit

                  Q6925

                  Q6930

                  Q6940

                  有效清理寬度 Width

                  mm

                  2500

                  3000

                  4000

                  室體進料口尺寸 Dimension

                  mm

                  2500×800

                  3000×800

                  4000×400

                  清理工件長度 Length

                  mm

                  300012000

                  240012000

                  450018000

                  輥道輸送速度 Speed(無極調速)

                  m/min

                  0.54.5

                  0.54

                  28

                  清理鋼板厚度 Thickness

                  mm

                  360

                  3110

                  4.5100

                  處理型材規格 Specifications

                   

                  60×8300×1000 

                  60×8300×1000

                  60×8300×1000

                  拋丸量 Shot peening quantity

                  kg/min

                  6×250

                  6×360

                  8×360

                  首次裝入量 First input volume

                  kg

                  4500

                  8000

                  11000

                  滾刷(刮板)調整寬度 Width

                  mm

                  600

                  850

                  900

                  通風量 Air volume

                  m3/h

                  27758

                  28050

                  38000

                  外形尺寸 Shape dimension

                  mm

                  31200×8070×7758

                  44042×6385×11117

                  45000×7830×11400

                  地面以下深度 Depth under the ground

                  mm

                  2353

                  2800

                  4317

                  總功率(不含除塵)Total power

                  kw

                  224.55

                  204.5

                  293.6

                  機器總重 Total weight

                  t

                  53.2

                  71.8

                  75

                   

                  中文字幕日韩精品亚洲一区